Signal Too Low. Intermittent Fault

Signal too low. Intermittent fault

Check signal cable
Check signal cable between:
- combined instrument panel #A2 and ABS control module #10
- ABS control module #10 and engine control module (ECM) #B1
- engine control module (ECM) #A55 and throttle unit #4
for a short-circuit to ground according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
Remedy as necessary.

Other information:
- To connect the breakout box, see Connecting breakout box, Combined instrument panel Connecting the Breakout Box.
- For information about signals, see Connector A, #A1 - #A30 , Connector B, #B1 - #B16 and Connector D, #D1 - #D5.





Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Check signal cable

FAULT FOUND - DONE

-------------------------------------------------