Drive Plate Overview

Drive Plate Overview






1 Drive Plate

• Removing and installing, refer to => [ Drive Plate ] Drive Plate.

2 Washer

3 Bolt

• 30 Nm + an additional 90° (1/4) turn.

• Always replace.

4 Washer

5 Sensor Wheel

• For the engine speed sensor

• Engine speed sensor removing and installing. Refer to => [ Engine Speed Sensor G28 ] Service and Repair.

6 Crankshaft Seal, Timing Chain Side

• Removing and installing, refer to => [ Crankshaft Seal, Timing Chain Side ] Crankshaft Seal, Timing Chain Side.

7 Torque Converter Centering Bushing

• Installed in the crankshaft.

8 Alignment Sleeve