Rear Final Drive Components, Right Flange Shaft Seal, Final Drive 0BP

Right Flange Shaft Seal, Final Drive 0BP

Special tools, testers and auxiliary items required

• Slide Hammer-Complete Set (VW 771)

• Additional Part for VW 771 (VW 771/37)

• Thrust Piece (T10433)

• Sealing Grease for Seal (G 052 128 A1)

Removing

- Remove the rear final drive. Refer to => [ Rear Final Drive ] Rear Final Drive.

- Remove the flange shaft seal using the slide hammer-complete set (VW 771) and additional part for VW 771 (VW 771/37).






Installing

- Install the new seal until seated using the thrust piece (T10433).






- Fill the space between the sealing and dust lips half way with sealing grease for seal (G 052 128 A1).

- Install the rear final drive. Refer to => [ Rear Final Drive ] Rear Final Drive.

- Check the rear final drive gear oil level. Refer to => [ Rear Final Drive Gear Oil Level, Checking ] Rear Final Drive Gear Oil Level, Checking.