Transmission

Transmission

• Do not run the engine and do not tow the vehicle if the transmission pan is removed or if there is no transmission fluid inside the transmission.

• Always clean the connection points and the area around them first, and then loosen them.

• When installing the transmission, make sure the centering sleeves are correctly installed between the engine and transmission.

• Place removed parts on a clean surface and cover them so that they do not get dirty. Use foil, paper or a lint free cloth.

• Carefully cover or seal unpacked components, if repairs cannot be performed immediately.

• Only install clean components: Remove the replacement parts from their packaging just prior to installing them.

• Do not let the engine run or tow the vehicle when the oil pan is removed or when there is no transmission fluid in the transmission.

• With the transmission removed, secure the torque converter so that it cannot fall out.

• Check the transmission fluid level. Refer to => [ Transmission Fluid Level, Checking and Filling ] ATF Level, Checking and Filling.