Hybrid Engine

Power Steering Pump Overview

• The pump assembly is not serviceable. If there are customer complaints, the cause must be determined using a pressure and leak test. In the event of a malfunction, replace the pump assembly.

• Always replace seals.

• Do not reuse fluid you have drained.

• If power steering fluid is low in the reservoir, check the steering system for leaks.

• If there are leaks in the area of the line connections, the lines/connections must first be inspected for leaks, tightened as necessary and wiped dry.

• Oil type: Hydraulic fluid (G 004 000 M2)






1 Power Steering Pump Assembly

• With Power Steering Control Module (J500).

• Repairs are not possible.

• Removing and installing, refer to => [ Power Steering Pump Assembly ] Power Steering Pump Assembly.

2 Clamp

• Install on the marking on the intake hose.

• For the correct allocation, refer to the Electronic Parts Catalog (ETKA).

3 Intake Hose

4 Seal

• Always replace if removed.

5 Rubber Mount

• 8 Nm

• Check for damage, cracks in the rubber, metal plate detached from the rubber, replace if necessary.

6 Bolt

• 20 Nm

7 Pressurized Line

• Push it all the way into the engine pump assembly when installing.

8 Nut

• 8 Nm

• Quantity: 4

9 Bracket

10 Bolt

• 9 Nm

• Additionally secure the coolant line bracket.

11 Bolt

• 25 Nm

• Quantity: 3