Front Belt Latches

Front Belt Latches

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removing

- Remove seat. Refer to => [ Front Seat ] Front Seat.

- Detach the wiring harness - 3 - from the fasteners in the seat frame.






- Remove the bolt - 2 - (50 Nm).

- Remove the belt latch - 1 - from the seat frame.

Installation

To install, perform the steps used in removal in reverse order.

After bolting of the belt latch, the wiring harness must be engaged in the front mount. Visually inspect for proper engagement.