Center Armrest Cupholder

Center Armrest Cupholder

Removing

• Place the selector lever in the "N" position.

• Open the storage compartment/ashtray unit.

- Turn off the ignition.

- Unclip the selector lever boot.

- Remove the gearshift mechanism trim. Refer to => [ Gearshift Mechanism Trim ] Gearshift Mechanism Trim.

- Unscrew the 6 screws (2.5 Nm) on the bottom of the gearshift mechanism trim and remove the cupholder.

Installation

- To install, perform the steps used for removal in reverse order.