Windshield Joint-Free Wiper Blades

Windshield Joint-Free Wiper Blades

- Remove the joint-free windshield wiper. Refer to => [ Windshield Joint-Free Windshield Wiper ] Windshield Joint-Free Windshield Wiper.

- Check on which side the wiper blade insert cannot slide into guide.

- Carefully pry out the cap - 1 - on the side on which the wiper blade cannot slide into the guide.






- Using a suitable screwdriver, open the wiper blade retainer - A - by bending it up.






- Replace the wiper blade.

• Make sure that the wiper blade is seated correctly in the wiper blade guides.

- Press the wiper blade retainer - A - back down with a suitable screwdriver until the wiper blade can no longer slide into the guide.






- Install the new cap - 1 - and check for secure seating.






- Install the joint-free windshield wiper. Refer to => [ Windshield Joint-Free Windshield Wiper ] Windshield Joint-Free Windshield Wiper.

- Check the wiper blade for proper functioning.