Windshield Joint-Free Windshield Wiper

Windshield Joint-Free Windshield Wiper

Removing

• Be careful not to confuse the driver side and front passenger side wiper blades when installing them.

• Joint-free wiper blades are very flexible. When lifting the wiper blades away from the windshield, only grasp them in the area of the wiper blade mount.

• To remove wiper blades, wiper arms must be driven into "service/winter position". The "service/winter position" is activated by operating windshield wiper lever in "one-touch wiping" position within 10 seconds after switching off ignition.

- Move the wiper arms to the "service/winter position".

- Fold up the wiper arm.

- Press the button - 1 - and remove the wiper blade mount - 3 - from the wiper arm - 2 - in - direction of arrow -.






Installing

Installation is performed in the reverse order of removal. Note the following:

- Slide the wiper blade mount - 3 - all the way into the wiper arm - 2 -.






- Make sure that the button - 1 - in the wiper arm - 2 - engages securely.

- Carefully fold the wiper arm back onto the windshield.