Shock Absorber, Coil Spring FWD

Overview: Shock Absorber, Coil Spring FWD

• Assembly Overview: Adaptive Chassis DCC (FWD) Shock Absorber => [ Overview: Adaptive Chassis DCC Shock Absorber, FWD ] Adaptive Chassis DCC Shock Absorber, FWD






1 Low Spring Support

• Spring end rotated up to stop

2 Assembly Aid

• Must not be used after removal

3 Coil Spring

• There are different suspension versions. Refer to => [ Vehicle Data Label ] Application and ID.

• Removing and installing, refer to => [ Coil Spring, FWD ] Coil Spring, FWD

4 Upper Spring Support

5 Bolt

• M14 x 1.5 x 85

• 180 Nm

• Always replace if removed.

6 Bolt

• M10 x 35

• 50 Nm + 90°additional turn

• Always replace if removed.

7 Shock Absorbers

• Removing and installing, refer to => [ Shock Absorber, FWD ] Shock Absorber, FWD

• There are different suspension versions, => [ Vehicle Data Label ] Application and ID vehicle data plate.

8 Washer

9 Lower Transverse Link

• Removing and installing, refer to => [ Lower Transverse Link, through MY 2010 FWD ] Lower Transverse Link, through MY 2010 FWD

10 Wheel Bearing Housing

• Removing and installing, refer to => [ Wheel Bearing Housing, FWD ] Wheel Bearing Housing, FWD