Steering Column Combination Switch (E595), Kostal

Steering Column Combination Switch (E595), Kostal


The removal and installation of individual steering column switch components must be done in a specified sequence. Refer to => [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.


• Risk of airbag deployment!

• The airbag unit could deploy if mishandled.

• Follow the safety precautions when working on the airbag. Refer to Airbag; Safety Precautions when Working with Airbags.


Follow the instructions described in the repair information regarding disconnecting and connecting the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

Removing

- Disconnect the battery. Refer to => [ Battery, Disconnecting ] Battery, Disconnecting.

- Remove the steering wheel.

- Remove the steering column trim.

- Remove the Steering Column Electronic Systems Control Module (J527) - 1 -, refer to => [ Steering Column Electronic Systems Control Module, Kostal ] Steering Column Electronic Systems Control Module (J527), Kostal.






- Remove the screw - 2 - and remove the complete steering column combination switch - 1 - from the steering column switch base carrier.

Installing

- Slide the steering column combination switch into the slide on the steering column switch base carrier.

- Tighten the threaded connection to the tightening specifications. Refer to => [ Steering Column Switch, With KESSY Overview ].

- Connect the battery. Refer to => [ Battery, Connecting ] Battery, Connecting.