Battery, Connecting

Battery, Connecting

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1331)


Risk of injury. Follow all Warnings and Safety Precautions.


In order to prevent damage to the battery or vehicle, observe battery type descriptions and notes.


Observe the information regarding the threaded connection of the battery terminals.

• After connecting the battery and switching the ignition on, the ASR/ESP Control Lamp (K155) lights up continuously. The ASR/ESP Control Lamp goes out automatically if a straight distance is driven at 15 to 20 km/h (9 to 12 m.p.h.). This activates the Steering Angle Sensor (G85).


Always follow the instructions regarding disconnecting and connecting the battery. Refer to=> [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

Procedure

- Connect the positive cable - 3 - to the positive terminal on the battery - 2 - and tighten the bolt. Refer to => [ Battery (A) Overview ] Battery (A) Overview.






- Connect the ground cable - 1 - to the negative terminal on the battery - 2 - and tighten the bolt. Refer to => [ Battery (A) Overview ] Battery (A) Overview.

- Closes the battery jacket.

- Perform the work steps listed in the Table.

Work Steps Required After Connecting The Battery






Print out the table if necessary.