C-Pillar Trim, Wagon

C-Pillar Trim, Wagon

• The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.

Removing

- Fold the bench seat and backrest forward.

- Remove the side cushion:

• with rear side airbags => [ Side Upholstery with Side Airbag ] Side Upholstery with Side Airbag.

• without rear side airbags => [ Side Upholstery without Side Airbag ] Side Upholstery without Side Airbag.

- Remove wheel housing trim. Refer to => [ Wheel Housing Trim, Wagon ] Wheel Housing Trim, Wagon.

- Remove the lock carrier cover. Refer to => [ Rear Lock Carrier Cover, Wagon ] Rear Lock Carrier Cover, Wagon.

- Remove luggage compartment side trim. Refer to => [ Luggage Compartment Side Trim, Wagon ] Luggage Compartment Side Trim, Wagon.

- Remove the airbag emblem - 1 - and remove the bolt - 4 - (4 Nm).

- Remove the trim - 3 - with the clip - 2 - inward - direction of arrow A - from the C-pillar mount and both clips - 5 -.

- Remove the trim downward - direction of arrow B -.






Installing

- Install in reverse order of removal.

• Before installing, inspect the securing clips for damage and replace if necessary.