Selector Shafts and Forks, Installed Position

Selector Shafts and Forks, Installed Position






1 Input Shaft
2 Output Shaft, 1st to 4th Gears
3 Output shaft 5th/6th and reverse gear
4 Reverse Shaft
A 3rd and 4th gear gearshift rod
B 1st and 2nd gear gearshift rod
C 5th and 6th gear gearshift rod
D Reverse gear shift fork 1)

1) On some transmissions, the bearing on the reverse gear shift fork on the shift rod for 5th and 6th gear shift fork - C -. Difference, reverse gear shift forks, refer to => [ Reverse Gear Selector Fork Differentiation ] Shift Forks.