Front Seat Belt Height Adjuster, Passat CC from MY 2009 and CC from MY 2010

Front Seat Belt Height Adjuster, Passat CC from MY 2009 and CC from MY 2010

• The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.

Removing

- Remove the upper B-pillar trim from the brackets. Refer to => [ Upper B-Pillar trim, Tightening and Loosening from Mount for Passat CC from 2009 and CC from 2010 ] Upper B-Pillar trim, Tightening and Loosening from Mount for Passat CC from 2009 and CC from 2010.

- Remove the bolt - 1 - (40 Nm) and remove the belt relay - 2 - from belt height adjuster.






- Remove bolt - 1 - (20 Nm) and separate belt height adjuster - 2 - from mounting in carrier plate.






Installing

- Install in reverse order of removal.