Standard Center Console, Passat from MY 2006, Passat Wagon from MY 2006, and Passat CC from MY 2009

Standard Center Console, Passat from MY 2006, Passat Wagon from MY 2006, and Passat CC from MY 2009

• To provide a better overview, the seats are not shown in the following illustration. It is not necessary to remove the seats.

Removing

- Remove footwell trim. Refer to => [ Footwell Trim ] Footwell Trim

- Remove front ashtray or front compartment. Refer to => [ Front Ashtray or Front Storage Compartment, Passat from MY 2006, Passat Wagon from MY 2006, and Passat CC from MY 2009 ] Front Ashtray or Front Storage Compartment, Passat from MY 2006, Passat Wagon from MY 2006, and Passat CC from MY 2009

- Remove Infotainment trim. Refer to => [ Infotainment Trim, Passat from MY 2006, Passat Wagon from MY 2006, and Passat CC from MY 2009 ] Infotainment Trim, Passat from MY 2006, Passat Wagon from MY 2006, and Passat CC from MY 2009

- Remove the cover, "Climatronic/Climatic". Refer to => [ Climatronic and Climatic Cover, Passat from MY 2006, Passat Wagon from MY 2006 and Passat CC from MY 2009 ] Climatronic and Climatic Cover, Passat from MY 2006, Passat Wagon from MY 2006 and Passat CC from MY 2009.

Vehicles without "Climatronic/Climatic"

- Remove heater and ventilation controls.

"Climatic" A/C System with Manual Control

Remove the heater and A/C controls, Climatic.

"Climatronic" A/C System with Automatic Control

- Remove the front A/C display control head (E87) with the Climatronic control module (J255).

- Remove lining mat - 1 - from center console.

- Remove the two bolts - 2 -.

- Remove the two nuts - 3 -.

• To remove the following screws - 4 -, the seats must be moved accordingly.

- Remove the two bolts - 4 -.

- Raise center console in rear area.

Vehicles with an AUX-In socket in the center console

- Remove the AUX IN socket.

- Loosen the center console from the centering tabs - 5 - in the center console.






Installing

- Insert center console in the two centering tabs - 5 - in instrument panel.

Vehicles with an AUX-In socket in the center console

- Install the AUX IN socket.

- Secure center console with two screws - 2 - (1.5 Nm).

- Bolt in center console in rear area with two nuts - 3 - (6 Nm).

- Secure center console in center and side area with two bolts - 4 - (1.5 Nm).

- Lay lining mat - 1 - in center console.






Rest of installation of center console is the reverse order of removal.