Footwell Trim

Footwell Trim

• Removal and installation is described for the left side, it is the same on the right side.

• The steering wheel and parts of the gearshift lever and driver seat are not shown in the illustration.

Removing

- Unclip cover - 1 - using a small screwdriver.

- Remove the bolt - 2 - (1.5 Nm).

- Remove trim from mounts in center console - arrows A, B and C -.

- Pull trim in area of front guide - 3 - out of mount in footwell - 4 - - arrow -.






Installing

- Install in reverse order of removal.