TDI

Generator Overview






1 - Hex Head Combination Bolt

• 40 Nm

• M10 x 35 mm

2 - Bracket

3 - Idler Pulley

4 - Screw

• 23 Nm

• M8 x 25mm

5 - Cap

6 - Hex Flange Bolt

• 22 Nm

• M8 x 90 mm

7 - Ribbed Belt Pulley

• 25 Nm + 60°

8 - Ribbed Belt

• Checking ribbed belt, refer to => [ Ribbed Belt, Checking ] Testing and Inspection.

9 - Generator

• Fastener, B+ wire to generator, 20 Nm.

• Generator, removing and installing, refer to => [ Generator ] Generator.

• Generator ribbed belt pulley, removing and installing, refer to => [ Ribbed Belt Pulley ] Service and Repair.