Flywheel: Service and Repair

Sealing Flange and Drive Plate/Flywheel Assembly Overview





1 Crankshaft Pulley/Vibration Damper

2 Bolt, 50 Nm + 90 (1/4) additional turn

• Quantity: 5

• Replace

• Only use N 907 630 04 bolts (strength category 10.9).

3 Bolt, 10 Nm

4 Sealing Flange, Belt Pulley Side

• With a integrated seal.

• Removal and installation, refer to => [ Sealing Flange, Belt Pulley Side ] Sealing Flange, Belt Pulley Side.

5 Cylinder Block

6 60 Nm + 90° (1/4) additional turn

• Replace

7 Drive Plate/Flywheel

• To remove, secure the crankshaft using the locking pin (T40069).

• Drive plate, removal and installation. Refer to => [ Drive Plate ] Drive Plate.

8 Sensor Wheel

• For the engine speed (RPM) sensor (G28).

• With position holder.

9 Crankshaft Seal, Transmission Side

• Removal and installation, refer to => [ Crankshaft Seal, Transmission Side ] Crankshaft Seal, Transmission Side.

10 Control Housing Cover

• Removal and installation, refer to => [ Control Housing Cover ] Service and Repair.

11 O-ring

• Replace

12 Bolt, 25 Nm

13 Alignment Bushings

14 Bolt, 5 Nm

15 Engine Speed (RPM) Sensor (G28)

16 Seal

• Replace