Front Seat Longitudinal Adjustment Drive Motor

Front Seats


Front Seat Longitudinal Adjustment Drive Motor

Removing

- Remove belt anchor --> [ Belt Anchor ]

- Position seat as far up as possible using height adjustment.

- Remove 12-way seat --> [ Front Seat ]

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Secure 12-way seat on fixture for seat repair (VAS 6136).

- Remove front seat trim --> [ Front Seat Trim ]

- Remove belt buckle --> [ Front Belt Buckle ] Front Belt Buckle, 12-way Seat

- Remove front seat control module --> [ Front Seat Control Module ].

- Remove seat longitudinal adjuster --> [ Front Seat Longitudinal Adjustment ].

- Pull the shaft - 1 - out from the drive motor - 3 -.

- Remove the two bolts - 2 - (2 Nm).

- Remove drive motor from seat longitudinal adjuster - 4 -.





Installing

- Perform the steps used for removal in reverse order.