Front Belt Buckle, 12-way Seat

Front Belt Buckle, 12-way Seat

• Removal and installation is described for the right-hand side of the vehicle. Removal and installation for the left-hand side is performed in the same manner.

Removing

- Remove belt anchor. Refer to => [ Belt Anchor ] Belt Anchor.

- Remove 12-way seat. Refer to => [ 12-way Seat ] 12-way Seat.

- Disconnect wiring harness from belt buckle - 1 - at coupling station under seat.

- Detach wiring harness from seat frame.

- Remove bolt - 2 - (50 Nm), remove spring washer - 3 - and belt buckle - 4 - from seat.





Installation

- To install, perform the steps used for removal in reverse order.