Front Seat Height Adjustment Drive Motor

Front Seats


Front Seat Height Adjustment Drive Motor

Removing

- Remove belt anchor --> [ Belt Anchor ]

- Position seat as far up as possible using height adjustment.

- Remove 12-way seat --> [ Front Seat ]

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Secure 12-way seat on fixture for seat repair (VAS 6136).

- Remove front seat trim --> [ Front Seat Trim ]

- Remove belt buckle --> [ Front Belt Buckle ] Front Belt Buckle, 12-way Seat

- Remove front seat control module --> [ Front Seat Control Module ].

- Remove seat longitudinal adjuster --> [ Front Seat Longitudinal Adjustment ].

- Remove the two screws - 3 - (18 Nm) and remove seat height adjustment drive motor - 2 - from seat longitudinal adjuster - 1 -.

• Two retaining tabs determine the drive motor installation position in the seat longitudinal adjuster.





Installing

- Perform the steps used for removal in reverse order.