Seat Belt Height Adjuster: Service and Repair

Front Seat Belt Height Adjuster

• The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.

Removing

- Remove the B-pillar upper trim. Refer to => [ B-Pillar Upper Trim, Loosening from Mounts and Securing ] B-Pillar Upper Trim, Loosening from Mounts and Securing

• It is not necessary to remove the belt anchor from the front seat belt.

- Remove bolt - 1 - (40 Nm) and remove belt relay - 2 - from belt height adjuster.

- Remove bolt - 3 - (20 Nm) and separate belt height adjuster - 4 - from mounting in carrier plate.






Installation

- Install in reverse order of removal.