Diagram 80/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Data Link Connector (DLC), Data Bus On Board Diagnostic Interface, ABS Warning Lamp, Brake System Warning Lamp, Instrument Cluster





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument Cluster Control Module with display unit Control Modules in Pass Compartment

J519 - Vehicle Electrical System Control Module Control Modules in Pass Compartment

J533 - Data Bus On Board Diagnostic Interface Control Modules in Pass Compartment

K - Instrument Cluster

K47 - ABS Warning Lamp Antilock Brake System w/ Anti Slip Regulation

K118 - Brake System Warning Lamp Locations

T16 - 16-Pin Connector, under instrument panel, left, Data Link Connector (DLC)

T20 - 20-Pin Connector, red

T32 - 32-Pin Connector

T52 - 52-Pin Connector, brown

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

Previous Diagram 80/6 (Tracks 57-70)

Next Diagram 80/8 (Tracks 85-98)