Air Injection: Service and Repair

Secondary Air Injection System Assembly Overview, with Engine Code CBFA





1 Gasket

• Always replace.

2 Secondary Air Injection (AIR) Solenoid Valve (N112)

• Removing and installing, refer to --> [ Secondary Air Injection Solenoid Valve, with Engine Code CBFA ] Service and Repair.

3 Bolt, 9 Nm

4 Secondary Air Injection (AIR) Sensor 1 (G609)

5 Seal

• Always replace.

6 to Upper Air Filter Housing

7 Secondary Air Pipe

• Ensure the pipe is securely seated.

8 Routing Aid for the Air Filter Drain Line

9 Nut, 9 Nm

10 Bracket

• For the AIR pump motor.

11 Nut, 25 Nm

12 Secondary Air Injection (AIR) Pump Motor (V101)

• Removing and installing, refer to --> [ Secondary Air Injection Pump Motor, with Engine Code CBFA ] Service and Repair.