Stabilizer Bar Assembly Overview
Stabilizer Bar Assembly Overview
The - arrow - points in direction of vehicle travel.
1 Stabilizer bar
• Note different suspension versions, refer to --> [ Vehicle Data Label ] Vehicle Data Label.
• Removing and installing, refer to --> [ Stabilizer Bar ] Stabilizer Bar.
2 Bushing
• Always replace the bushings on both sides of the vehicle.
3 Bracket
4 Bolt, 25 Nm + 45° additional turn
• Tighten uniformly.
• Always replace after removal.
• Always tighten threaded connections in curb weight position. Refer to --> [ Wheel Bearing Housing, Lifting to Curb Weight Position ] Wheel Bearing Housing, Lifting to Curb Weight Position.
5 Wheel bearing housing
6 Nut, 45 Nm
• Self locking.
• Always replace after removal.
7 Bolt
• Self locking.
• Always replace after removal.
8 Coupling rod
• Connects the stabilizer bar to the trailing arm/wheel bearing housing.
9 Subframe