Electromechanical Steering Gear Assembly Overview, Generation 3
Electromechanical Steering Gear Assembly Overview, Generation 3
1 Electrical wiring
2 Universal joint
3 Bolt, 30 Nm
• M8 x 35.
• Always replace after removal.
4 Bolt, 6 Nm
• Self-tapping.
5 Shield
6 Steering gear
• With power steering control module.
• With electromechanical power steering motor.
• With engine speed (RPM) sensor.
• With steering torque sensor.
• With steering angle sensor.
• Can be tested in "Guided Fault Finding" using the vehicle diagnosis, testing and information system (VAS 5051B).
• Removing and installing, refer to --> [ Steering Gear, Generation 3 ] Steering Gear, Generation 3.
7 Left wheel bearing housing
8 Nut, 20 Nm + 90° additional turn
• M12 x 1.5.
• Self locking.
• Always replace after removal.
9 Bolt, 50 Nm + 90° additional turn
• Always replace after removal.
10 Subframe
11 Right wheel bearing housing