Removal (from 07/2011)

SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY (for Hatchback 3 Door): REMOVAL

HINT
The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.

1. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)

Removal (from 07/2011)

2. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)

Removal (from 07/2011)

3. REMOVE REAR SEAT ASSEMBLY (for Fold Down Seat Type)

Removal (from 07/2011)

4. REMOVE DECK BOARD ASSEMBLY Removal (from 07/2011)

5. REMOVE NO. 2 ROOM LIGHT ASSEMBLY Removal (from 07/2011)

6. REMOVE JACK HANDLE (for RH Side)

7. REMOVE REAR FLOOR FINISH PLATE Removal (from 07/2011)

8. REMOVE FRONT DOOR SCUFF PLATE Removal (from 07/2011)

9. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP Removal (from 07/2011)

10. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY Removal (from 07/2011)

11. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY Removal (from 07/2011)

12. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY Removal (from 07/2011)

13. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side) Removal (from 07/2011)

14. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side) Removal (from 07/2011)

15. REMOVE ROOF SIDE INNER GARNISH Removal (from 07/2011)

16. REMOVE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY

(a) Remove the bolt and the shoulder anchor.





(b) Remove the bolt, disengage the 2 hooks to remove the rear seat 3 point type outer belt assembly.





17. REMOVE SEAT BELT HOLE SEAL

(a) Disengage the 2 claws to remove the seat belt hole seal.