Removal

2AR-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

1. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

2. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

3. REMOVE ENGINE UNDER COVER LH

4. REMOVE ENGINE UNDER COVER RH

5. DRAIN ENGINE COOLANT Testing and Inspection

6. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

7. REMOVE INLET AIR CLEANER ASSEMBLY Removal

8. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (for PZEV) Removal

9. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (except PZEV) Removal

10. REMOVE AIR CLEANER FILTER ELEMENT

11. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

12. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

(a) Disconnect the engine coolant temperature sensor connector.





(b) Remove the engine coolant temperature sensor and gasket.