Removal

2AR-FE ENGINE CONTROL SYSTEM: AIR FUEL RATIO SENSOR: REMOVAL

1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

2. REMOVE INLET AIR CLEANER ASSEMBLY Removal

3. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR Removal

4. REMOVE AIR FUEL RATIO SENSOR

(a) Remove the hose clamp.





(b) Disconnect the air fuel ratio sensor connector.

(c) Using SST, remove the air fuel ratio sensor from the exhaust manifold.





SST : 09224-00010