Removal (to 12/2010)

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT AIRBAG SENSOR: REMOVAL

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.

1. PRECAUTION

CAUTION:
Be sure to read the "PRECAUTION" thoroughly before servicing Precaution (to 12/2010).

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

3. REMOVE COOL AIR INTAKE DUCT SEAL Removal

4. REMOVE RADIATOR GRILLE SUB-ASSEMBLY Removal

5. REMOVE FRONT BUMPER ASSEMBLY Removal

6. REMOVE FRONT AIRBAG SENSOR

(a) Disconnect the connector from the front airbag sensor (LH).





(b) Remove the bolt and the front airbag sensor (LH).