Removal (from 12/2010)

2GR-FE ENGINE CONTROL SYSTEM: KNOCK SENSOR: REMOVAL

1. PREVENT GASOLINE FROM SPILLING OUT

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. DRAIN ENGINE COOLANT Service and Repair

4. REMOVE WINDSHIELD WIPER MOTOR & LINK ASSEMBLY

Removal

5. REMOVE COWL TOP PANEL OUTER Removal (from 12/2010)

6. REMOVE V-BANK COVER SUB-ASSEMBLY Removal (from 12/2010)

7. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE Removal (from 12/2010)

8. REMOVE INTAKE AIR SURGE TANK Removal (from 12/2010)

9. REMOVE INTAKE MANIFOLD Removal (from 12/2010)

10. REMOVE KNOCK CONTROL SENSOR

(a) Disconnect the 2 knock control sensor connectors.





(b) Remove the 2 bolts and 2 knock control sensors.