Removal (from 12/2010)

2GR-FE ENGINE CONTROL SYSTEM: VVT SENSOR: REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal (from 12/2010)

2. REMOVE VVT SENSOR

(a) Intake camshaft (Bank 1).





(1) Disconnect the VVT sensor connector.

(2) Remove the bolt and the VVT sensor.

(b) Exhaust camshaft (Bank 1).





(1) Remove the windshield wiper link assembly Removal.

(2) Remove the cowl top outside panel front Removal (from 12/2010).

(3) Disconnect the VVT sensor connector.

(4) Remove the bolt and the VVT sensor.

(c) Exhaust camshaft (Bank 2).





(1) Disconnect the VVT sensor connector.

(2) Remove the bolt and the VVT sensor.

(d) Intake camshaft (Bank 2).





(1) Disconnect the VVT sensor connector.

(2) Remove the bolt and the VVT sensor.