Installation

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY

(a) Engage the guide as shown in the illustration.





(b) Install the rear combination light assembly with the 3 nuts.

(c) Engage the 2 clamps.

Torque : 6.8 Nm (69 kgf-cm, 60 in-lbf)

(d) Connect the connector.

2. INSTALL REAR BUMPER ASSEMBLY

Installation

3. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER

(a) Install the luggage compartment inner trim cover with the 2 clips.

4. INSTALL REAR FLOOR FINISH PLATE

(a) Engage the 7 clips and install the rear floor finish plate.

5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

(a) Engage the 2 pins to install the 2 No. 1 luggage compartment trim hooks.





6. INSTALL LUGGAGE COMPARTMENT SIDE TRAY ASSEMBLY

(a) Engage the clip and install the luggage compartment side tray assembly.

(b) Install the bolt.

7. INSTALL SPARE WHEEL COVER ASSEMBLY

8. INSTALL SPARE WHEEL COVER CLAMP

9. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

10. INSTALL REAR LIGHT ASSEMBLY

(a) Install the rear light assembly with the 4 nuts.

Torque : 6.8 Nm (69 kgf-cm, 60 in-lbf)

(b) Connect the connector.

11. INSTALL LUGGAGE COMPARTMENT DOOR COVER