General Torque Specifications

TORQUE CHART








TORQUE SEQUENCES



Note: Remove No.1, No.3 and No.4 bearing caps, then alternately loosen the 2 bolts for No.3 bearing cap.

Intake Camshaft Bearing Cap Removal Sequence:

Note: Use the same procedure as described for the exhaust camshaft.

Cylinder Head Removal:

Cylinder Head Installation:

Intake Camshaft Installation:

Exhaust Camshaft Installation:

Water Pump Bolt Tightening Sequence:

See also: Refer to Diagrams/Exploded Views at component level.