Master Cylinder ServiceSteps

NOTES, WARNINGS, AND HINTS
Service Notes
PARTS REMINDER LIST
Service Notes
RECOMMENDED TOOLS
Tools and Equipment

PROCEDURES
1. Check for applicable Technical Service Bulletins (TSB).
2. Perform Initial Test Drive and Diagnosis By Symptom.
Testing and Inspection
3. Inspect master-cylinder.
Testing and Inspection
4. Remove master-cylinder.
Service and Repair
5. Rebuild or replace master-cylinder as necessary.
Service and Repair
6. Adjust pushrod and Install master-cylinder.
Service and Repair
7. Bench bleed master-cylinder.
Service and Repair
8. Bleed front and rear brakes.
9. Adjust rear brakes.
Adjustments
10. Adjust parking-brake.
Adjustments
11. Install tire and wheel assembly.
Installing Tire and Wheel Assembly
12. Perform After Repairs Test Drive.
Testing and Inspection

ENVIRONMENTAL AND SAFETY CONCERNS
Technician Safety Information