Replacement

K41B CVT: FRONT DIFFERENTIAL OIL SEAL: REPLACEMENT

1. REMOVE FRONT DRIVE SHAFT ASSEMBLY

Removal

2. REMOVE NO. 1 CVT TYPE T OIL SEAL

(a) Remove the 2 bolts and remove the drive shaft heat insulator bracket from the engine.





(b) Using SST, remove the No. 1 CVT type T oil seal.





SST : 09308-00010

3. REMOVE NO. 2 CVT TYPE T OIL SEAL

(a) Using SST, remove the No. 2 CVT type T oil seal.





SST : 09308-00010

4. INSTALL NO. 1 CVT TYPE T OIL SEAL

(a) Using SST and a hammer, install a new No. 1 CVT type T oil seal.





Text in Illustration





SST : 09309-15020

SST : 09950-70010

09951-07200

Oil seal drive-in depth:

2.6 to 3.6 mm (0.102 to 0.141 in.) (from the end of the case)

(b) Install the drive shaft heat insulator bracket onto the engine with the 2 bolts.

Torque : 16 Nm (166 kgf-cm, 12 ft-lbf)

5. INSTALL NO. 2 CVT TYPE T OIL SEAL

(a) Using SST and a hammer, install a new No. 2 CVT type T oil seal.





Text in Illustration





SST : 09387-00010

SST : 09950-70010

09951-07200

Oil seal drive-in depth:

2.6 to 3.6 mm (0.102 to 0.141 in.) (from the end of the case)

6. INSTALL FRONT DRIVE SHAFT ASSEMBLY

Installation