Installation

STEERING COLUMN: STEERING WHEEL: INSTALLATION

1. INSTALL LOWER STEERING WHEEL BOSS COVER

(a) Engage the 4 claws and install the lower steering wheel boss cover.

2. INSTALL STEERING SHAKE DAMPER

(a) Install the steering shake damper with the 2 screws.

3. INSTALL NO. 1 STEERING WHEEL ORNAMENT

(a) Engage the claw and install the No. 1 steering wheel ornament.

(b) Install the screw.

4. INSTALL STEERING PAD SWITCH LH Installation

5. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

6. ADJUST SPIRAL CABLE Installation

7. INSTALL STEERING WHEEL ASSEMBLY Installation

8. INSTALL STEERING PAD Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

10. INSPECT SRS WARNING LIGHT

Diagnosis System