Installation

SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side): INSTALLATION

CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Service Precautions.

1. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH

(a) Install the front seat inner belt assembly RH with the bolt.

Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

(b) Engage the front seat inner belt wire harness clamp.

(c) Engage the front seat inner belt wire harness clamp.

(d) Connect the front seat inner belt connector.

(e) Install the front seatback band.

2. INSTALL FRONT SEAT CUSHION INNER SHIELD RH

HINT
Use the same procedure as for the LH side Reassembly.

3. INSTALL FRONT SEAT ASSEMBLY RH Installation

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

5. INSPECT SRS WARNING LIGHT

Diagnosis System