Installation

LIGHTING (EXT): HEADLIGHT DIMMER SWITCH: INSTALLATION

1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY

(a) Engage the claw and install the headlight dimmer switch, as shown in the illustration.





(b) Using pliers, contract the clamp as shown in the illustration.





(c) Connect the connector.

2. INSTALL WIPER SWITCH Installation

3. INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY Installation

4. INSTALL STEERING COLUMN UPPER COVER Installation

5. INSTALL STEERING COLUMN LOWER COVER Installation

6. ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY Installation

7. INSTALL STEERING WHEEL ASSEMBLY Installation

8. INSTALL STEERING PAD Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

10. INSPECT SRS WARNING LIGHT

Service Precautions