Installation

PARKING BRAKE: PARKING BRAKE LEVER: INSTALLATION

1. INSTALL PARKING BRAKE SWITCH ASSEMBLY

(a) Install the parking brake switch assembly to the parking brake lever assembly with the screw.

2. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY

(a) Pass the No. 1 parking brake cable assembly through the parking brake lever sub-assembly.

(b) Bend the parking brake lever claw.





(c) Install the parking brake lever sub-assembly with the 2 bolts.

Torque : 15 Nm (148 kgf-cm, 11 ft-lbf)

(d) Tighten the 2 nuts.

Torque : 17 Nm (173 kgf-cm, 13 ft-lbf)

(e) Connect the parking brake switch connector.

(f) Temporarily install the adjusting nut and the lock nut to the No. 1 parking brake cable assembly.





Text in Illustration





3. ADJUST PARKING BRAKE LEVER TRAVEL Adjustments

4. INSPECT BRAKE WARNING LIGHT Adjustments

5. INSTALL REAR CONSOLE BOX ASSEMBLY Installation

6. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation