Reassembly

DOOR / HATCH: BACK DOOR: REASSEMBLY

1. INSTALL BACK DOOR WEIGHT

(a) Engage the hook.

(b) Install the back door weight with the 3 bolts.

Torque : 12 Nm (122 kgf-cm, 9 ft-lbf)





2. INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY Installation

3. INSTALL BACK DOOR OUTSIDE HANDLE Installation

4. INSTALL BACK DOOR LOCK ASSEMBLY Installation

5. INSTALL DOOR PULL HANDLE

(a) Engage the 4 claws and install the door pull handle.





6. INSTALL REAR WIPER MOTOR GROMMET Installation

7. INSTALL REAR WIPER MOTOR ASSEMBLY Installation

8. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY Installation

9. INSTALL BACK DOOR TRIM BOARD

(a) Engage the 9 clips and install the back door trim board.