Installation

U760E AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: INSTALLATION

1. INSTALL TRANSMISSION WIRE

(a) Coat the O-ring with ATF.





(b) Install the transmission wire and lock plate to the transmission valve body assembly with the bolt.

Torque : 11 Nm (110 kgf-cm, 8 ft-lbf)

(c) Install the transmission wire to the clamp.

(d) Install the transmission wire and lock plate to the transmission valve body assembly with the bolt.

Torque : 11 Nm (110 kgf-cm, 8 ft-lbf)

(e) Connect the 8 connectors.

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY Installation

3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Reassembly

4. INSTALL TRANSMISSION OIL CLEANER MAGNET Reassembly

5. INSTALL AUTOMATIC TRANSAXLE OIL PAN GASKET Reassembly

6. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY Reassembly

7. ADJUST AUTOMATIC TRANSAXLE FLUID

Service and Repair

8. INSTALL NO. 1 ENGINE UNDER COVER Installation