Removal

LIGHTING (EXT): HEADLIGHT DIMMER SWITCH: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY

(a) Remove the spiral with sensor cable sub-assembly Removal.

3. REMOVE WIPER AND WASHER SWITCH ASSEMBLY Removal

4. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY

(a) Disconnect the connector.





(b) While loosening the band clamp as shown in the illustration and detach the claw.

(c) Remove the headlight dimmer switch.





NOTICE:
If the claw is pressed forcefully, it will break.