Installation

U760E AUTOMATIC TRANSMISSION / TRANSAXLE: TCM: INSTALLATION

1. INSTALL TCM

(a) Install the TCM to the automatic transaxle.





(b) Install and tighten the 2 bolts in the order shown in the illustration.

Torque : 11 Nm (115 kgf-cm, 8 ft-lbf)

(c) Connect the connector.





Text in Illustration





(d) Turn the lock lever and attach the claw to secure the connector.

2. INSTALL BATTERY CARRIER ASSEMBLY Installation

3. INSTALL BATTERY TRAY

4. INSTALL BATTERY

5. INSTALL BATTERY INSULATOR

6. INSTALL BATTERY CLAMP SUB-ASSEMBLY Installation

7. INSTALL AIR CLEANER CASE SUB-ASSEMBLY Installation

8. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

10. CHECK AUTOMATIC TRANSAXLE SYSTEM

NOTICE:
If automatic transaxle parts are replaced, refer to Parts Replacement Compensation Table to determine if any additional operations are necessary Service Precautions.