Installation

HEATING / AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SENSOR: INSTALLATION

1. INSTALL NO. 1 COOLER THERMISTOR





NOTICE:
If reusing the evaporator, do not insert the No. 1 cooler thermistor into a location where the No. 1 cooler thermistor was previously inserted. Insert the No. 1 cooler thermistor within range C shown in the illustration.

(a) Install the No. 1 cooler thermistor as shown in the illustration.

2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY Reassembly

3. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY Reassembly

4. INSTALL NO. 2 HEATER CONTROL CABLE SUB-ASSEMBLY Reassembly

5. INSTALL AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY Reassembly

6. INSTALL BLOWER ASSEMBLY Reassembly

7. INSTALL AIR CONDITIONING UNIT

Installation