Installation

ENGINE IMMOBILISER: TRANSPONDER KEY ECU: INSTALLATION

1. INSTALL TRANSPONDER KEY ECU ASSEMBLY

(a) Install the transponder key ECU assembly with the screw.





(b) Connect the connector.

2. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY Installation

3. CONNECT PASSENGER AIRBAG CONNECTOR

4. INSTALL FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag) Installation

5. INSTALL FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag) Installation

6. INSTALL FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag)

HINT

Use the same procedure for the RH and LH side.

7. INSTALL FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag)

HINT

Use the same procedure for the RH and LH side.

8. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

9. INSTALL NO. 1 RADIO BRACKET Installation

10. INSTALL NO. 2 RADIO BRACKET Installation

11. INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY

12. INSTALL UPPER CONSOLE PANEL Installation

13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Installation

14. INSTALL COMBINATION METER ASSEMBLY Installation

15. INSTALL METER HOOD SUB-ASSEMBLY Installation

16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected Testing and Inspection.

17. REGISTER ECU COMMUNICATION ID

NOTICE:

When replacing the transponder key ECU assembly, perform initialization Programming and Relearning.

18. REGISTER KEY

NOTICE:

When replacing the transponder key ECU assembly, perform initialization Programming and Relearning.