Removal

AXLE: REAR AXLE HUB: REMOVAL

REMOVAL
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. REMOVE REAR WHEEL
2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal
3. LOOSEN WIRE ADJUSTING NUT Removal
4. REMOVE REAR FLOOR SIDE MEMBER COVER Removal
5. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY Removal
6. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY





(a) Remove the 2 bolts, and separate the rear disc brake caliper assembly.
7. REMOVE REAR DISC Removal
8. SEPARATE SKID CONTROL SENSOR WIRE Removal
9. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY





(a) Remove the 4 bolts and the hub and bearing assembly.
10. REMOVE REAR DISC BRAKE DUST COVER SUB-ASSEMBLY