Removal

CLUTCH: CLUTCH MASTER CYLINDER: REMOVAL

CLUTCH: CLUTCH MASTER CYLINDER: REMOVAL

1. DRAIN BRAKE FLUID
NOTICE: Wash brake fluid off immediately if it adheres to any painted surface.

2. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY
(a) Remove the master cylinder Removal.
3. REMOVE BRAKE BOOSTER ASSEMBLY
(a) Remove the booster Removal.





4. DISCONNECT CLUTCH RESERVOIR TUBE
(a) Loosen the clip and disconnect the clutch reservoir tube from the clutch master cylinder.
HINT: Use a container to catch the fluid.





5. DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE
(a) Using SST, disconnect the flexible hose tube.
SST: 09023-00101
HINT: Use a container to catch the fluid.





6. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS HOLE PIN
(a) Remove the clip and hole pin.
7. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY
(a) Remove the 2 nuts and clutch master cylinder.