Removal

BRAKE: BRAKE BOOSTER: REMOVAL

BRAKE BOOSTER: REMOVAL

1. DRAIN BRAKE FLUID
NOTICE: Wash off brake fluid immediately if it comes in contact with any painted surface.

2. REMOVE FRONT WIPER ARM HEAD CAP Removal
3. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH Removal
4. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH Removal
5. REMOVE HOOD TO COWL TOP SEAL Removal
6. REMOVE COWL TOP VENTILATOR LOUVER LH Removal
7. REMOVE WINDSHIELD WIPER MOTOR AND LINK Removal
8. REMOVE OUTER COW TOP PANEL SUB-ASSEMBLY Removal
9. REMOVE NO. 1 COWL WATER EXTRACT HOSE Removal
10. REMOVE LOWER COWL BODY MOUNTING BRACKET LH Removal
11. REMOVE AIR CLEANER CAP SUB-ASSEMBLY
12. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY Removal
13. DISCONNECT BRAKE MASTER CYLINDER PUSH ROD CLEVIS Removal
14. REMOVE FRONT WHEEL LH





15. REMOVE NO. 5 FRONT BRAKE TUBE
(a) Using SST, disconnect the No. 5 front brake tube and remove it.
SST: 09023-00101





16. REMOVE BRAKE TUBE
(a) Remove the 3 brake tubes from the clamps as shown in the illustration.
(b) Remove the clamp from the brake tubes.





17. REMOVE BRAKE BOOSTER ASSEMBLY
(a) Loosen the clevis lock nut and remove the clevis from the brake booster.
(b) Slide the clip and disconnect the vacuum hose from the brake booster.
(c) Remove the 4 nuts and brake booster.
(d) Remove the check valve and grommet from the brake booster.
18. REMOVE BRAKE BOOSTER GASKET